Advantech EDG-4508, User Manual

Page: 83 / 140

Chapter 6 Setting Up Custom 75
2. If the EDG-4508/4516 you wish to add is listed in the Add Server
Wizard window, use the mouse to highlight the server Model and then
click on Next to continue.
Note: If the server you want to add is not listed in the above
window, you will receive the warning window shown below.
Check to make sure that the power cord is connected,
and the power switch is in the “on” position. Click OK to
return to the window shown above, and then click on Find.
The new server should now be listed as shown above.
Note: If you have several servers hooked up to your network,
and it’s not clear which server is the one you are currently
adding, click on Locate in the Add Server Wizard window
shown in step 2 above. The “Ready” LED on the listed
server will start blinking, allowing you to identify it.