manualshive.com logo in svg

Advantech EDG-4508, User Manual

Share
Download
Advantech EDG-4508 User Manual Download Page 64

56

EDG-4508/4516  User's Manual

4. Click on Open and then wait until you see an “upgrade completed”

message. The server will restart automatically.

Note:

When using this procedure, only the selected server’s firm-
ware is upgraded. If you know that new EDG-4508/4516
Manager software has been released, it is recommended
that you uninstall the old EDG-4508/4516 Manager pro-
gram from your NT/95/98 host’s hard drive, and then in-
stall the new one.

Configuring Server Properties

The Server Properties function can be used to change the server’s
name, password, and transmission parameters. Choose Server Prop-

erties from the Server menu, or click on the toolbar Server Properties icon
to start the function.

Server Properties-General

You may modify the Server Name, Server IP, and Netmask by using the
toolbar Properties function.

1. Select the General tab in the Server Properties window.

2. Modify the Server Name, Server IP, and Netmask, as needed.

3. Select Enable or Disable, for DHCP, depending on whether or not you

are using a DHCP server.

 

Summary of Contents for EDG-4508













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands