manualshive.com logo in svg

Advantech EDG-4508, User Manual

Share
Download
Advantech EDG-4508 User Manual Download Page 116

108

EDG-4508/4516  User's Manual

•

Pink means that two or more EDG-4508/4516 s have been assigned the
same IP address. You must use EDG-4508/4516 Manager to rectify the
situation.

Port Status

This function is used to display a status graph for each port being
monitored. It also provides additional information such as TX/RX

CPS history.

1. Click on the port item you wish to check to highlight it.

2. Choose Port Status from the Monitor menu, or click on the toolbar

Port Status icon.

3. Click OK to return to the EDG-4508/4516 Monitor window.

Refresh Monitor

This function is provided to allow you to manually update or re-
fresh port information.

1. Click on the port you would like to refresh to highlight it.

2. Click on Monitor and choose Refresh Monitor, or click on the toolbar

Refresh Monitor icon to update port information manually.

 

 

Summary of Contents for EDG-4508













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands