Advantech EDG-4508, User Manual

Page: 86 / 140

78 EDG-4508/4516 User's Manual
Note: If you see ports with the status ‘Non-authorized’, and you
are a general user, be sure to ask your server administra-
tor to add access permission so that you can make mod-
ifications to the server settings.
Note: The EDG-4508/4516 Manager title bar shows the applica-
tion mode of the newly installed server-Custom in this
case.
9. To add another server, choose Add Server Wizard from the Server
menu, or click on the toolbar Add Server icon, and then repeat the
above steps.
10.Before exiting EDG-4508/4516 Pro Manger you should save the new
configuration. Choose Save Configuration from the Server menu, or
click on the toolbar Save all Servers icon to carry this out.
11.Exit EDG-4508/4516 Manager when you finish.
Deleting a Server
If for some reason you need to delete a server from your system,
click on the server name to highlight it, and then choose Delete
Server from the Server menu, or click on the toolbar Delete Server icon. A
warning window will pop up asking if you really want to delete the server.
Click OK to delete.
Modifying COM Name Mappings
You may use EDG-4508/4516 Manager to change previously as-
signed COM names. Choose Map Port from the Port menu, or click
on the toolbar Map Port icon. You will be asked to choose from two
options. You may change the name of all servers simultaneously, provid-
ed you want the COM port numbers to be consecutive, or, you may
change the names one port at a time. The procedure is as follows:
Change All COM Names Consecutively:
1. Click on the server name whose port names you would like to modify.