manualshive.com logo in svg

Advantech EDG-4508, User Manual

Share
Download
Advantech EDG-4508 User Manual Download Page 1

Preface and Table of Contents

Copyright Notice

This document is copyrighted, 2001, by Advantech Co., Ltd. All rights
are reserved. Advantech Co., Ltd., reserves the right to make improve-
ments to the products described in this manual at any time without
notice.

No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this manual
is intended to be accurate and reliable. However, Advantech Co., Ltd.
assumes no responsibility for its use, nor for any infringements upon
the rights of third parties which may result from its use.

CE Notification

The EDG-4508/4516 has passed the CE test for environmental
specifications. Test conditions for passing included the equipment
being operated within an industrial enclosure. In order to protect the
EDG-4508/4516 system from being damaged by ESD (Electrostatic
Discharge) and EMI leakage, we strongly recommend the use of
CE-compliant industrial enclosure products.

Printed in Taiwan

Feb. 2001

Summary of Contents for EDG-4508













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands