determine the timing as well as the amount and type of bolus you
need to deliver. Make sure you know your personal carbohydrate
insulin ratio and your correction bolus ratio.
➨
When your insulin pump is in STOP,
it does not deliver any
insulin. Put your insulin pump into
RUN
to continue the insulin
delivery.
➨
After inserting a new battery,
always ensure that the time
and date of your insulin pump are set correctly.
Incorrect
programming of the time and date may cause incorrect insulin
delivery.
➨
If your insulin pump “times out” before you finish
programming a bolus, no bolus is delivered.
Check the bolus
history screens on your insulin pump for the bolus amount
delivered with time and date and program a new bolus if necessary.
➨
If you do not set the correct battery type
on your insulin pump,
the alert A2: BATTERY LOW may not occur in time to provide you
sufficient warning to replace your battery.
➨
If you flip the display orientation of your insulin pump by
180 °, the
a
and
s
keys will also reverse their functions.
In
comparison to the display orientation, the upper key will be
a
and the lower key will be
s
. This change applies for all
a
and
s
functions including turning on the backlight. The
d
and
f
keys will not change in their function, but will remain the same,
regardless of your screen orientation.
➨
If data transfer between your PC and your insulin pump is
disrupted in any way,
the configuration may be incomplete and an
error E12: DATA INTERRUPTED occurs. The data transfer must be
completed successfully before you can put your insulin pump into
RUN
.
14
Before you begin
Summary of Contents for Spirit
