ABB SmartTouch i-bus KNX Product Manual Download Page 162

Page: 162 / 332

KNX control elements and application parameters

"Display" control element

Product manual 2CKA00xx73xxxxx

│

162

10.13

"Display" control element

10.13.1 Name of the control element

Options: <Name>

Naming of the display control element.

The length of the name is limited to 36 characters.

10.13.2 Function of the control element

Options:

Not defined (grey)

Light (yellow)

Blind (blue)

Temperature (orange)

Scene (magenta)

Alarm (red)

Feedback (green)

The parameter is used to specify the colour of the function line.

"Not defined (grey)" has been made available for functions of this type.

10.13.3 Type of display element

Options:

Status display

Value display

Linear measurement display

Round measurement display

Wind rose

Wind force

Temperature

Rain

Twilight

Brightness

Moisture

Air pressure

–

Status display

: The status of an allocated element is displayed as text.

–

Value display

: The value of an allocated element is displayed.

–

Linear measurement display

: The measured values of an allocated element are displayed in

linear form.

–

Round measurement display

: The measured values of an allocated element are displayed in

round form.

–

Wind rose

: The measured values (wind direction) of an allocated element are displayed as

wind rose.

–

Wind force

: The wind force values of an allocated element are displayed.

–

Temperature

: The temperature values of an allocated element are displayed.

Summary of Contents for SmartTouch i-bus KNX













































































































































































































































































































































Search results

Summary of Contents for SmartTouch i-bus KNX

Reviews:

Related manuals for SmartTouch i-bus KNX

Brands by name

Popular brands

ABB SmartTouch i-bus KNX, Product Manual

Search results

Summary of Contents for SmartTouch i-bus KNX

Reviews:

Related manuals for SmartTouch i-bus KNX

Brands by name

Popular brands