ABB SmartTouch i-bus KNX Product Manual Download Page 175

Page: 175 / 332

KNX control elements and application parameters

Control element "Audio control"

Product manual 2CKA00xx73xxxxx

│

175

10.14.4 Use of play button

Options:

Deactivated

Activated

–

Deactivated

: No playback button is enabled. No additional parameters available.

–

Activated

: The playback button is enabled. The following supplementary parameter is

available:

Object type play button

Options:

1 bit

1-byte value [0 - 255]

The parameter is used to specify the size of the communication object for sending
telegrams.

– 1

bit

: Commands of a playback button are sent with 1 bit (0 or 1). The following

supplementary parameter is available:

Value for play

Options:

The parameter is used to send the command of the playback button with "0" or "1".

1-byte value [0 - 255]

: The value of a playback button is sent as 1-byte value without a

sign. The following supplementary parameter is available:

Value for play

Options:

Setting option from 0 - 255

The parameter is used to send the value of the playback button as absolute value.

10.14.5 Use of pause button

Options:

Deactivated

Activated

–

Deactivated

: No pause button is enabled. No additional parameters available.

–

Activated

: The pause button is enabled. The following supplementary parameter is

available:

Object type pause button

Options:

1 bit

1-byte value [0 - 255]

The parameter is used to specify the size of the communication object for sending
telegrams.

– 1

bit

: Commands of a pause button are sent with 1 bit (0 or 1). The following

supplementary parameter is available:

Value for pause

Options:

Summary of Contents for SmartTouch i-bus KNX













































































































































































































































































































































Search results

Summary of Contents for SmartTouch i-bus KNX

Reviews:

ABB SmartTouch i-bus KNX, Product Manual, Page: 175 / 332

Search results

Summary of Contents for SmartTouch i-bus KNX

Reviews: