Operation
Product manual 2CKA00xx73xxxxx
│
317
12.7.6 System settings - User settings
The display language and the function of sensors and door communication can be set within the
user settings. The user settings can also be reset.
12.7.7 System settings - Video surveillance
New cameras can be added and existing cameras can be managed in the video surveillance
area. Also the camera software can be updated.
Notice
The ABB SmartTouch
®
only supports IP cameras of type ONVIF/RTSP.
ONVIF is always set automatically.
Adding IP camera
IP cameras can be added and edited via the IP camera tab. The system can be searched
automatically for existing cameras. Cameras can also be integrated manually into the system.
1. Tap on the plus icon.
2. Select whether cameras should be searched for automatically or added manually.
– Cameras that are found are listed in the screen area on the right. Tap on the
corresponding camera to select it.
Fig. 66: Adding IP camera
– Select the camera protocol for the manually added camera, and enter the IP address,
the user name as well as the password.
3. Then add the camera via "Add".
4. Then name the camera and locate it accordingly. If necessary, add a preview image via the
"Create preview image" button.
