Commissioning of the KNX Function via DCA (from ETS5)
Product manual 2CKA00xx73xxxxx
│
84
8.10.7 Application
"Internal
RTC"
This application has no application page. The internal RTC can be controlled via the "RTC
control element" (extension unit). For this the control element must be allocated accordingly and
equipped with group addresses.
The general settings can be made via the DCA as follows:
1. Open the "Applications" tab in the library area.
2. Open the "Internal RTC".
– The general settings for this application are displayed in the "Parameter" area and can
be edited here.
Notice
Individual internal RTCs can be created. These can also be added via the work
area.
■
Here a page with a plus is displayed. This page must be clicked. This is how
a further internal RTC is added and displayed in the tree structure.
■
If it is called up via the tree structure, the settings can be adjusted for the
individual internal RTCs in the "Parameter" area.
■
By clicking the arrow next to "Internal RTC", all available internal RTCs are
displayed.
For further setting or selection options via the "Parameter" area for the general settings of the
function of the internal RTC, see chapter 8.10.7 “Application "Internal RTC"“ on page 84.
8.10.8 "Favourite control elements"
You can create favourites under "Favourite control elements" in the "Applications" tree structure.
You can then use these favourite control elements repeatedly on other operating pages in the
DCA. A control element can be pulled out of the tree structure into an operating page via drag
and drop.
Note
Favourites must first be added to the favourites list, see chapter 8.9.3 “Add
control element to favourites list“ on page 79.
Renaming favourites
1. Open the "Applications" tab in the library area.
2. Open "Favourite control elements".
3. In the tree structure, click on the favourites entry with the right mouse button.
– A pop-up menu opens.
4. Click on "Rename" and change the name.
