KNX control elements and application parameters
"Display" control element
Product manual 2CKA00xx73xxxxx
│
165
–
2-byte value [-32768 - +32767]
: A value is sent as 2-byte value with a sign, e.g. actuating
value or time difference.
–
2-byte floating point
: A value is sent as 2-byte floating point value, e.g. a temperature value,
a time duration, a performance or a consumption value.
–
4-byte value [0 - 4294967295]
: A value is sent as 4-byte value without a sign, e.g. actuating
value.
–
4-byte value [-2147483648 - 2147483647]
: A value is sent as 4-byte value with a sign, e.g.
actuating value or time difference.
–
4-byte floating point
: A value is sent as 4-byte floating point value, e.g. an energy display,
electric current (A), electric power (W), DTP 14.
–
14-byte value
: Makes it possible to send any text with a maximum of 14 characters.
The following supplementary parameters are available for all options, except for option "14-byte
value":
Notice
Different values can be preset or set, depending on the selected option.
Unit
:
Options: <Text>
The parameter is used to enter the unit or the unit sign with which the value is displayed in the
display element.
The length of the text is limited to 60 characters.
Decimal places
:
Options:
Setting option from 0 - 2
The parameter is used to specify the number of decimal places of the displayed value.
The number is limited to 2 places.
Thousands separator
:
Options:
Deactivated
Activated
The parameter is used to specify whether a thousands separator is displayed in the value.
Minimum object value
:
Options:
Setting option depends on the selected object type.
The parameter is used to specify the smallest value that is sent via telegrams to the display
element.
Any value within the limits specified by the object type and its value range can be entered.
