Commissioning of the KNX Function via DCA (from ETS5)
Product manual 2CKA00xx73xxxxx
│
75
8.8.6
"Blind" control element
A blind control can be set up via the "Blind" control element. This allows an allocated blind to be
operated.
Setting and selection options via the "Parameter" area of the DCA, see chapter 10.6 “"Blind"
control element“ on page 131.
8.8.7
Control element "RTC control element"
The "RTC control element" (extension unit) can be used to control an allocated room
temperature controller, for example.
Setting and selection options via the "Parameter" area of the DCA, see chapter 10.7 “Control
element "RTC control element"“ on page 135.
8.8.8
Control element "Fan switch"
A fan control can be set up via the "Fan switch" control element. This, for example, allows the
fan speed level to be changed for an allocated fan.
Setting and selection options via the "Parameter" area of the DCA, see chapter 10.8 “Control
element "Fan switch"“ on page 139.
8.8.9
Control element "Split Unit Control"
A climate control can be set up via the "Split Unit control". This, for example, allows a heating or
cooling function to be set up for an allocated fan.
Setting and selection options via the "Parameter" area of the DCA, see chapter 10.9 “Control
"Split Unit Control"“ on page 145.
8.8.10 Control element "VRV control"
A climate control can be set up via the "VRV control". This, for example, allows a cooling
function to be set up for an allocated fan.
Setting and selection options via the "Parameter" area of the DCA, see chapter 10.10 “Control
"Split Unit Control"“ on page 150.
