Commissioning of the KNX Function via DCA (from ETS5)
Product manual 2CKA00xx73xxxxx
│
46
8
Commissioning of the KNX Function via DCA (from ETS5)
Commissioning the ABB SmartTouch
®
via the plug-in ETS5 commissioning tool DCA.
8.1
Integration into the KNX system (ETS)
Notice
The device meets KNX guidelines and can be used as product of the KNX
system. Detailed expert knowledge for understanding by means of KNX training
is assumed, especially with regard to the commissioning software ETS.
8.1.1 Prerequisites
DCA version
The minimum requirement is the use of DCA from version 1.2.0.
ETS version
The minimum requirement is the use of ETS from version 5.
SD card
The following SD card types are supported:
Type:
Every commercially available SD card is supported
Capacity:
4 - 128 GB
File system:
exFAT / FAT32
Notice
■
It is recommended to use SD cards from ScanDisk, Kingston and Transcend
that have been fully tested and checked.
■
While pictures are being recorded or copied on the card, do not remove the
SD card nor restart the panel. Otherwise, pictures may not be displayed.
■
ABB is not liable for the performance of an SD card.