ABB i-bus KNX, Product Manual, Page: 51 / 264

ABB i-bus
®
KNX
Device technology
FCA/S 1.x.x.1 | 2CDC508134D0202 49
Device type Application Maximum
communication objects
Maximum
Group addresses
Maximum
assignments
FCA/S 1.2.2.2 Fan Coil Actuator 0-10V M/...* 70 254 255
* … = Current version number of the application.
Please refer to the software information on our website for this purpose.
Note
ETS and the current version of the device application are required for programming.
The current version of the application is available on the Internet for download at www.abb.com/knx .
After import into ETS it appears in the Catalogs window under Manufacturers/ABB/Heating, Ventilation,
Air Conditioning/Fan Coil Actuator 0-10V .
The device does not support the locking function of a KNX device in ETS. If you use a BCU code to
inhibit access to all the project devices, this has no effect on this device. Data can still be read and
programmed.
2.4.2 Outputs, valve V1/2, analog
Rated values Quantity 2, non-isolated, short-circuit proofed
Control signal 0
…10 V DC
Signal type Analog
Output load > 10 kohms
Output tolerance ± 10 %
Current limitation Up to 1.5 mA
2.4.3 Inputs
Rated values Quantity 3
Contact scanning Floating
Scanning current 1 mA
Scanning voltage 10 V
Resistance
0…1,000 ohms,
PT100 2-conductor technology,
PT1000 2-conductor technology,
A selection of KT/KTY 1,000/2,000,
User-defined
Resolution, accuracy and tolerances See next page
Line length Between sensor and device input Maximum 30 m, simple