ABB i-bus KNX, Product Manual, Page: 134 / 264

ABB i-bus
®
KNX
Commissioning
132 2CDC508134D0202 | FCA/S 1.x.x.1
Enable communication object
"Status byte fan" 1-byte
Options: No
Yes
From this status byte the states heating, cooling, automatic, forced operation and the four limitations are
indicated directly via a 1 bit coding.
For further information see: Status byte fan , p. 258

Yes : The communication object Status byte fan is enabled.
Dependent parameter:
Send object value
Options: No, update only
On change
After request
After a change or request

No, update only : The status is updated but not sent.

On change : The status is sent when a change occurs.

After request : The status is sent when a request occurs.

After a change or request : The status is sent on a change or a request.