ABB i-bus KNX, Product Manual, Page: 208 / 264

ABB i-bus
®
KNX
Commissioning
206 2CDC508134D0202 | FCA/S 1.x.x.1
No. Functionality Name
Data Point
Type (DPT)
Length
Flags
C R W T U
80 Switch Output H 1.001 1 bit x x
81 Permanent on Output H 1.003 1 bit x x
82 Disable function Time Output H 1.003 1 bit x x
83 Status Switch Output H 1.001 1 bit x x x
84…89
Not assigned
90
Block
Input a: Switch sensor 1.003 1 bit x x
Input a: Value/forced operation 1.003 1 bit x x
Output value Input a: Temperature sensor 9.001 2 byte x x x
91
Switch 1 Input a: Switch sensor 1.001 1 bit x x x
Value 1 Input a: Value/forced operation Variable x x
Request output value Input a: Temperature sensor 1.009 1 bit x x
92
Switch 2 Input a: Switch sensor 1.001 1 bit x x x
Value 2 Input a: Value/forced operation Variable x x
Measured value out of range Input a: Temperature sensor 1.001 1 bit x x x
93
Switch 3 Input a: Switch sensor 1.001 1 bit x x x
Threshold 1 Input a: Temperature sensor Variable x x x
94
Start event 0/1 Input a: Switch sensor 1.001 1 bit x x
Change Threshold 1 lower limit Input a: Temperature sensor Variable x x x
95 Change Threshold 1 upper limit Input a: Temperature sensor Variable x x x
96 Threshold 2 Input a: Temperature sensor Variable x x x
97 Change Threshold 2 lower limit Input a: Temperature sensor Variable x x x
98 Change Threshold 2 upper limit Input a: Temperature sensor Variable x x x
99 Not assigned
100…109
Input b
The same CO as Input a
110…119
Input c
The same CO as Input a
120 Toggle heating General 1.100 1 bit x x
121 Valve control values parallel mode General 1.100 1 bit x x