ABB ACS580-01 drives, Hardware Manual

Page: 161 / 226

Technical data 161
Materials
Drive enclosure • PC/ABS 3 mm, color NCS 1502-Y (RAL 9002 / PMS 1C
Cool Grey) and RAL 9002
• PC+10%GF 3.0mm, Color RAL 9002 (in frames
R0…R3 only)
• hot-dip zinc coated steel sheet 1.5 to 2.5 mm, thickness
of coating 100 micrometers, color NCS 1502-Y
Package Plywood, cardboard and moulded pulp. Foam cushions
PE, PP-E, bands PP.
Disposal The main parts of the drive can be recycled to preserve
natural resources and energy. Product parts and materials
should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and
its alloys, and precious metals can be recycled as
material. Plastics, rubber, cardboard and other packaging
material can be used in energy recovery. Printed circuit
boards and DC capacitors (C1-1 to C1-x) need selective
treatment according to IEC 62635 guidelines. To aid
recycling, plastic parts are marked with an appropriate
identification code.
Contact your local distributor for further information on
environmental aspects and recycling instructions for
professional recyclers. End of life treatment must follow
international and local regulations.
Applicable standards
The drive complies with the following standards. The compliance with the European Low
Voltage Directive is verified according to standard EN 61800-5-1.
EN 60204-1:2006 + AC:2010 Safety of machinery. Electrical equipment of machines.
Part 1: General requirements
. Provisions for compliance:
The final assembler of the machine is responsible for
installing
- emergency-stop device
- supply disconnecting device.
IEC/EN 60529:1992 + A2: 2013 Degrees of protection provided by enclosures (IP code)
EN 61000-3-12:2011 Electromagnetic compatibility (EMC) - Part 3-12: Limits -
Limits for harmonic currents produced by equipment
connected to public low-voltage systems with input current
IEC/EN 61800-3:2004 + A1:2012 Adjustable speed electrical power drive systems. Part 3:
EMC requirements and specific test methods
IEC/EN 61800-5-1:2007 Adjustable speed electrical power drive systems. Part 5-1:
Safety requirements – electrical, thermal and energy
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage
systems. Part 1: Principles, requirements and tests.
UL 508C 3rd edition UL Standard for Safety, Power Conversion Equipment,
second edition