3D Systems CUBE User Manual Download Page 120

Page: 120 / 121

116

3D Systems, Inc

CUBIFY SUSTAINABILITY PROGRAM

By its very nature 3D printing is a sustainable technology empowering 3D Systems’ printers to produce affordable products one layer at

a time using only the necessary amount of material required for each part with near zero waste in an energy efficient process.

Cube 3D printers use eco-friendly plastics that can be recycled, re-purposed or composted responsibly . 3D Systems invites all Cube

and Cubify consumers to partner in creating a cleaner world, one printed part at a time, by participating in the Cubify Sustainability

Program .

• Cartridge Recycling:

Send your empty Cube cartridges to either our USA or Germany

location . Be sure to keep the address label that comes with each cartridge for recycling .

• Plastics Recycling:

Send your used PLA and ABS printed parts to either our USA or Ger-

many location . We will properly and responsibly compost, recycle, and reuse your returned

plastic parts as a renewable source to manufacture new cartridges, reducing both raw

materials consumption and the waste stream .

3D Systems is committed to continuously improve the sustainability of its 3D printing products .

For questions, feedback and suggestions, please contact

cubify@cubify .com

Send cartridges and plastics to:

3D Systems Corporation

333 Three D Systems Circle
Rock Hill, SC 29730
USA

3D Systems Cartridge Recycling Centre

c/o UPS SCS GmbH & Co . OHG
Biberweg 12
53842 Troisdorf
Germany

Please visit

http://cubify .com/en/Info/Sustainability

for more information .

WARNING: IT IS THE RESPONSIBILITY OF THE USER TO DISPOSE OF ANY REFUSE GENERATED BY THE USE

OF THE CUBE PRINTER IN A RESPONSIBLE MANNER ACCORDING TO ALL LOCAL LAWS AND STATUTES .

Summary of Contents for CUBE

























































































































Search results

Summary of Contents for CUBE

Reviews:

Related manuals for CUBE

Brands by name

Popular brands

3D Systems CUBE, User Manual

Search results

Summary of Contents for CUBE

Reviews:

Related manuals for CUBE

Brands by name

Popular brands