3D Systems CUBE, User Manual

Page: 53 / 121

49 3D Systems, Inc .
Print Settings
Print Settings allow you to set the parameters of your print and build them into your print file. There are four (4) different options for
setting the print parameters .
Presets
• Draft A print that does not require strength or fine details.
• Standard A strong print that does not require fine details.
• Premium A strong print that requires fine details.
• Custom Allows you to set the layer thickness, density, and fill pattern. You may also enable or disable
supports and rafts .
Layers
• 0 .070 mm High quality prints
• 0 .200 mm Shorter print time
Density
• Hollow Short print times and low material use
• Strong Stronger prints
• Almost Solid High material use and almost solid prints
Fill Pattern
• Honeycomb Used for strong prints
• Diamonds For general printing
• Lines Shorter print time
A
B
C
D