3D Systems CUBE, User Manual

Page: 13 / 121

9 3D Systems, Inc .
4 . Open the box .
5 . Remove the upper foam support .
6 . Remove the printer from the box and remove the protective bag from the printer .
Place the printer on a solid, level base where you intend to use it .
NOTE: When installing the printer there must be a minimum of 8”
(203 mm) of space on top and on either side of the printer .
NOTE: There must be a minimum of 4” (102 mm) space in front of
and behind the printer .
7 . Remove the top insert .
8” (203 mm)
8”
(203 mm)
8”
(203 mm)
Hand Clearance Around the Printer Build Plate Travel Area
4” (102 mm)
4” (102 mm)
Back
Front
Front View Top View