3D Systems CUBE, User Manual

Page: 83 / 121

79 3D Systems, Inc .
10
OPERATION PROCEDURES
APPLYING CUBE GLUE
Cube Glue contains water-soluble glue that adheres the part to the print pad . It is important that glue is applied to the print pad before
starting any print to ensure that the creation does not move during the printing process .
Cube Glue contains a foam applicator under the cap . It is recommended that the bottle is turned upside-down with the cap on to allow
the glue to settle into the applicator before applying .
For best results, apply two thin layers of glue to the print pad using slow circular motions when prompted by the touchscreen display .
Apply the glue in an overlapping pattern . The coverage dimensions should be larger than the footprint of the creation you are printing .
Layer 1
Apply a
thin
layer of glue to the print pad following the illustration below:
Layer 2
Apply a second thin layer of glue to the print pad following the illustration below:
NOTE: For best results, allow the glue to dry before printing .