3Com OfficeConnect WX2200, User Manual

Page: 20 / 204

20 C
HAPTER
1: G
ETTING
S
TARTED
Start 3WXM
Services
3WXM Services are automatically started when you install them on a
Windows system.
To start the 3WXM Services on a Unix or Linux System:
To start 3WXM Services manually, type a command such as the
following:
solaris#
rm-services start
To stop 3WXM Services manually, type a command such as the following:
solaris# rm-services stop
These examples assume that 3WXM Services is installed in the default
location.
Connect 3WXM
Clients to 3WXM
Services
To connect the client to Services:
1 Select Start > Programs > 3Com > 3WXM > 3WXM . The 3WXM
Services Connection wizard is displayed.
2 Enter the IP address or fully-qualified hostname of the machine on which
the service is installed.
If 3WXM Services is installed on the same machine as the one you are
using to run 3WXM client, enter 127.0.0.1 as the IP address. This is a
standard IP loopback address.
3 Specify the service port, if different from the port number in the Service
Port listbox.
The port number used by the monitoring service must not be used by
another application on the machine where the monitoring service is
installed. If the port number is used by another application, change the
port number on the monitoring service. (See “Configure 3WXM Services”.)
4 Click Next to connect to the server.
5 If the Certificate Check dialog is displayed, click Accept .
If you left the Open Network Plan option on the 3WXM Services
Connection dialog selected, the server opens the last network plan.