3Com OfficeConnect WX2200, User Manual

Page: 19 / 204

Installing 3WXM 19
5 Open a shell window.
6 Use the cd command to go to the directory in which you saved the
installation binary.
7 In the shell window, type sh ./install.bin . The Introduction page of the
3WXM installation wizard appears.
8 Click Next to display the Choose Installation Type page of the installation
wizard, and go to “Using the Installation Wizard”.
The installer does not make any path changes during installation. You
might want to configure path information, to make 3WXM easy to start
on your system. 3WXM must be run at the root level.
Using the Installation Wizard
To use the installation wizard on a Linux system:
1 On the Choose Installation Type page, choose one of the following:
„
To install both the 3WXM server and the client, click the 3WXM
Services icon.
„
To install only the 3WXM client, click the 3WXM client icon.
For detailed installation instructions, see “Installing 3WXM” in the
Wireless LAN Switch Manager Reference Manual .
Near the end of the installation process, the installer displays the service
ports 3WXM Services will use:
„
443—HTTPS server port
„
162—SNMP trap receiver port
You can change one or both port numbers to prevent conflicts with other
applications on the same host.
Multiple applications cannot use the same UDP or TCP port on the same
host. For example, port 443 is defined by the Internet Assigned Numbers
Authority (IANA) as the well-known HTTPS port. If the host on which you
install 3WXM Services uses its default HTTPS port (443), and the same
host also runs Microsoft Internet Information Services (IIS) on its default
HTTPS port (443), there will be a conflict over the port. 3WXM clients will
not be able to communicate with 3WXM Services.
If you plan to use the remote configuration option to configure new
switches, you must use port 443 for 3WXM Services. When a switch
requests its configuration from 3WXM Services, it sends the request to
port 443.