3Com LINKBUILDER 3C18500, User Manual

Page: 91 / 242

Module Management 5 - 33
DUA1850-0AAA0 5
Module Configuration Screen
The Module Configuration screen lists the following data read from the
selected module:
■
slot number.
■
module type.
■
service type.
■
module status.
■
typical power requirement.
■
hardware version.
■
software version (if any).
This is a read-only screen. This information is transferred to NVRAM.
Thereafter when you exchange a module, the software checks the new
module’s data against that in NVRAM. There are two possibilities.
■
The module is of the same variety as that removed and the parameters,
set for the previous module by the manager, are retained.
■
The module is a different variety and the default parameters are
applied.
Figure 5-23 Module Configuration Screen
MODULE CONFIGURATION FACILITY TABLE CANCEL