3Com LINKBUILDER 3C18500, User Manual

Page: 121 / 242

Managing Modules 8 - 11
DUA1850-0AAA05
Repeater Service - This shows the service to which the module was
attached earlier.
Slot Number - The number of the MSH slot occupied by the module
is displayed.
Module Type - This shows the type of module in the reported slot.
List Box - The list-box displays the Port Number, Media Type, Port
State, Partition (state) and Link (state) of ports that make up the
module.
Buttons - There are potentially five buttons across the bottom of the
screen. Each has an associated range of Access Levels, shown below
as [ 1, 2, 3, 4, 5 ]. These control the security of the function. If you
have been assigned an Access Level corresponding to one of the
range of numbers, the button will be presented to you on the
screen. The buttons allow you to move to the respective screen. The
table below details the use of the buttons.
If the module you have selected to configure is either a Secure ECS
Module (3C1207X with adapter) or a MSH Secure Ethernet Repeater
Module (3C18110), you will be presented with another button -
SECURITY. Operating this button will take you to an 802.3 Security
screen (not illustrated).
For the MSH Smart Secure Ethernet Repeater Modules (3C1812XA and
3C18135A), security is enabled from the Port Setup screen (see
page 8-14 ) or, more effectively, from your management application.
Table 8-2
Where The Buttons Lead
Button Access Level Screen Described on
OK [ 1, 2, 3, 4, 5 ] Repeater Configuration page 8-8
PORT STATS [ 1, 2, 3, 4, 5 ] Port Statistics page 8-13
PORT SETUP [ 3, 4, 5 ] Port Setup page 8-14
RESILIENCE [ 3, 4, 5 ] 802.3 Resilience page 8-17