3Com LINKBUILDER 3C18500, User Manual

Page: 82 / 242

5 - 24 C
H A P T E R
5: M
A N A G I N G
T
H E
C
H A S S I S
U
S I N G
T
H E
VT100 I
N T E R F A C E
DUA1850-0AAA0 5
MSH Status
The MSH Status screen displays the status parameters which will give
you basic data about the health of the MSH hub and its networks.
Figure 5-16 MSH Status Screen
System Up Time This field indicates how long the chassis has
been running since the last reset. The time is given in seconds. See
“ Resetting with Stored Settings ” on page 5-27 .
Number of Resets This is a count of system resets. This information
may be useful to your technical support representative in the event
of problems.
Last Reset Type This field indicates the cause of the last reset. Types
of Reset you may see are listed below.
Power Reset – power was interrupted or the Reset button used.
Command – management has called a reset.
Watchdog – the Software has hung (based on a time-out).
Other – very rare! A system error has been detected.
This information may be useful to your technical support representative
in the event of problems.
The version numbers of the management module, EPROM software
and PROMs are displayed in a block at the bottom of the screen.
OK FAULT LOG