3Com LINKBUILDER 3C18500, User Manual

Page: 93 / 242

Intelligent Module Management 5 - 35
DUA1850-0AAA0 5
Bridge), two Ethernet addresses will appear. When you select MANAGE,
a further screen will allow you to configure the IP address, SubNet Mask
and Default Router address of the bridge.
Figure 5-25 Intelligent Module Screen
The IP address of the Local Bridge Module must be of the same
subnetwork as the MSH chassis, otherwise you may find you are not
allowed to set the IP address. The solution is to change the IP address
of the MSH hub to be on the same subnet as the proposed IP address
of the Local Bridge Module, before making a second attempt to set the
latter’s address. Do remember to reset the MSH IP address to the
original value when you have successfully set the IP address of the
bridge.
OK CANCEL