3Com Router 5000/6000 Family
79
Command Reference
if-match mpls-exp
Use the
if-match mpls-exp
command to configure the matching rule for EXP domain of MPLS.
Class view
if-match mpls-label
Use the
if-match mpls-label
command to configure to match public network routes with MPLS labels
only.
Route-Policy view
if-match outbound-interface
Use the
if-match outbound-subinterface
command to define an outbound subinterface matching rule for
the class.
Class view
if-match packet length
Use the
if-match packet-length
command to set length match conditions of IP packets.
Route-Policy view
if-match protocol
Use the
if-match protocol
command to define protocol matching rules.
Class view
if-match protocol rtp
Use the
if-match protocol rtp
command to configure RTP matching rules.
Class view
if-match rtp
Use the
if-match rtp
command to define port match rule of RTP.
Class view
if-match tag
Use the
if-match tag
command to match the tag field of OSPF route information.
Routing Policy view
igmp enable
Use the
igmp enable
command to enable IGMP on an interface.
Interface view
igmp group-limit
Use the
igmp group-limit
command to limit the number of IGMP groups joined on the interface. If the
number exceeds the limit, the router will not process the joined IGMP packet any more.
Interface view
igmp group-policy
Use the
igmp group-policy
command to set the filter of multicast groups on an interface to control the
accessing to the IP multicast groups.
Interface view
igmp host-join
Use the
igmp host-join
command to enable an interface of a router to join a multicast group.
Interface view
igmp lastmember-queryinterval
Use the
igmp lastmember-queryinterval
command to set the interval at which IGMP querier sends the
IGMP specified group query packet when it receives IGMP Leave packet from the host.
Interface view
igmp max-response-time
Use the
igmp max-response-time
command to configure the maximum response time contained in the
IGMP query packet.
Interface view
igmp proxy
Use the
igmp proxy
command to specify an interface of a leaf network router as the IGMP proxy of another
interface.
Interface view
igmp robust-count
Use the
igmp robust-count
command to set the times IGMP querier sends the IGMP specified group query
packet when it receives IGMP Leave packet from the host.
Interface view
