3Com 5000/6000 Quick Reference Manual Download Page 35

Page: 35 / 162

3Com Router 5000/6000 Family

Command Reference

display aspf all

Use the

display aspf all

command to view the information of all ASPF policies and sessions.

Any view

display aspf interface

Use the

display aspf interface

command to view the interface configuration of the inspection policy.

Any view

display aspf policy

Use the

display aspf policy

command to view the configuration of a specific inspection policy.

Any view

display aspf session

Use the

display aspf session

command to view the information of the ASPF sessions.

Any view

display atm class

Use the

display atm class

command to view the information about ATM-Class. By default, if no

ATM-Class name is specified, the information of all ATM-Class is displayed.

Any view

display atm interface

Use the

display atm map-info

command to view the information about the upper layer protocol mapping

table of ATM.

Any view

display atm map-info

Use the

display atm map-info

command to display upper layer protocol map information about a specified

ATM interface.

Any view

display atm map-info

Use the

display atm map-info

command to view the information about the upper layer protocol mapping

table of ATM.

Any view

display atm pvc-group

Use the

display atm pvc-group

command to view the information about PVC-Group.

Any view

display atm pvc-info

Use the

display atm pvc-info

command to view the information about PVC.

Any view

display auto-config

Use the

display auto-config

command to view the status of

auto-config

Any view

display bgp l2vpn

Use the

display bgp l2vpn all

command to view system operating information and all L2VPN

information.

Any view

display bgp group

Use the

display bgp group

command to view the information of peer groups.

Any view

display bgp multicast group

Use the

display bgp multicast group

command to view the information about peer groups.

Any view

display bgp multicast network

Use the

display bgp multicast network

command to view the routing information that MBGP advertises.

Any view

display bgp multicast peer

Use the

display bgp multicast peer

command to view information about MBGP peers.

Any view

display bgp multicast routing

Use the

display bgp multicast routing

command to view the MBGP routing information whose IP

address is specified in the BGP routing table.

Any view

Summary of Contents for 5000/6000



































































































































































Search results

Summary of Contents for 5000/6000

Reviews:

Related manuals for 5000/6000

Brands by name

Popular brands

3Com 5000/6000, Quick Reference Manual

Search results

Summary of Contents for 5000/6000

Reviews:

Related manuals for 5000/6000

Brands by name

Popular brands