138
3Com Router 5000/6000 Family
Command Reference
shdsl rate
Use the
shdsl rate
command to set single-pair interface rate of the SHDSL interface or just select
auto-negotiation mode. You can specify maximum line rate.
ATM (G.SHDSL) Interface view
shdsl snr-margin
Use the
shdsl snr-margin
command to set a target margin to signal-to-noise ratio (SNR).
ATM (G.SHDSL) Interface view
shdsl wire
Use the
shdsl wire
command to set the operating mode of the current G.SHDSL interface.
ATM (G. SHDSL) Interface view
shell
Use the
shell
command to enable terminal services on the user interface.
User Interface view
shell priority high
Use the
shell priority high
command to set command execution first.
System view
shutdown
Use the
shutdown
command to shut down the CPOS physical interface.
CPOS Interface view
shutdown
Use the
shutdown
command to shut down the Ethernet port.
Ethernet Port view
shutdown
Use the
shutdown
command to disable the current switching PVC.
Frame Relay Switching view
shutdown
Use the
shutdown
command to shut down the interface.
Interface view
shutdown
Use the
shutdown
command to disable the MSDP peer specified.
MSDP view
shutdown (in Voice Entity View)
Use the
shutdown
command in voice entity view to configure to change the management status of specified
voice entity from UP to DOWN.
Voice Entity view
shutdown (in Voice Subscriber-Line View)
Use the
shutdown
command in voice subscriber-line view to configure the voice subscriber-line from UP to
DOWN.
Voice Subscriber-Line view
signal-value
Use the
signal-value
command to configure the digital E&M subscriber-line to receive and transmit the
ABCD bits of idle signaling and seizure signaling.
Digital E&M Voice Subscriber-Line view
silence-th-span
Use the
silence-th-span
command to set the silence detection parameters that have the system take
automatic on-hook action.
FXO Subscriber-Line view
silent-interface
Use the
silent-interface
command to disable a specified interface to transmit IS-IS packet.
IS-IS view
silent interface
Use the
silent-interface
command to disable an interface to transmit OSPF packet.
OSPF view
simultaneous-bindings
Use the
simultaneous-bindings
command to enable simultaneous binding.
MR view
sip
Use the
sip
command to access SIP client view.
Voice view
