82
3Com Router 5000/6000 Family
Command Reference
info-center monitor channel
Use the
info-center monitor channel
command to have the info-center output information over the
specified channel to the user terminal.
System view
info-center snmp channel
Use the
info-center snmp channel
command to set the information channel for SNMP.
System view
info-center source
Use the
info-center source
command to add records to an information channel.
System view
info-center synchronous
Use the
info-center synchronous
command to enable synchronous terminal output.
System view
info-center timestamp
Use the
info-center timestamp
command to set a time stamp format for the system information output to
the information channels except for the log host.
System view
info-center timestamp loghost
Use the
info-center timestamp loghost
command to set a time stamp format for the system information
output to the log host.
System view
info-center trapbuffer
Use the
info-center trapbuffer
command to enable the trap buffer, set its size and the channel that
outputs information to it.
System view
interface
Use the
interface
command to create a P2MP or P2P subinterface.
System view
interface
Use the
interface
command to enter the specified interface view or create a logical interface or
subinterface.
System view
interface
Use the
interface
command to enter Ethernet port view.
System view
interface atm
Use the
interface atm
command to enter the view of the specified ATM E1/T1 interface.
System view
interface bridge-template
Use the
interface bridge-template
command to create a bridge template interface, connecting the
specified bridge set to the routing network.
System view
interface dialer
Use the
interface dialer
command to create a dialer circular group for the Circular DCC, or configure a
dialer interface for the Resource-Shared DCC.
System view
interface encrypt
Use the
interface encrypt
command to enter encryption card interface view.
System view
interface ethernet
Use the
interface ethernet
command to create an Ethernet subinterface.
System view
interface ima
Use the
interface ima
command to enter the specified IMA group interface view.
System view
interface logic-channel
Use the
interface logic-channel
command to create a logical channel interface.
System view
