3Com 5000/6000 Quick Reference Manual Download Page 111

Page: 111 / 162

3Com Router 5000/6000 Family

111

Command Reference

peer timer

Use the

peer timer

command to configure Keepalive and Holdtime intervals for a peer (group).

BGP view

peer upe

Use the

peer upe

command to configure BGP peer as the UPE of hierarchical BGP/MPLS VPN.

BGP view

permanent-active

Use the

permanent-active

command to configure BSV interfaces to permanent active.

BSV Interface view (in NTmode)

pfs

Use the

pfs

command to set the Perfect Forward Secrecy (PFS) feature for the IPSec policy to initiate the

negotiation.

IPSec Policy view

IPSec Policy Template view

phy-mru

Use the

phy-mru

command to configure in asynchronous flow mode MRU at the physical layer.

Asynchronous Serial Interface view

physical-mode

Use the

physical-mode

command to set the operating mode of the synchronous/asynchronous serial

interface.

Serial Interface view

pim

Use the

pim

command to enter PIM view.

System view

pim bsr-boundary

Use the

pim bsr-boundary

command to configure an interface to become the PIM domain boundary.

Interface view

pim dm

Use the

pim dm

command to enable PIM-DM.

Interface view

pim neighbor-limit

Use the

pim neighbor-limit

command to limit PIM neighbor number on an router interface. If the number

exceeds the limit configured, no new neighbor can be added to the router.

Interface view

pim neighbor-policy

Use the

pim neighbor-policy

command to configure a router to filter the PIM neighbor of the current

interface.

Interface view

pim sm

Use the

pim sm

command to enable PIM-SM protocol on an interface.

Interface view

pim timer hello

Use the

pim timer hello

command to configure the interval for sending PIM router Hello messages.

Interface view

ping

Use the

ping

command to test connectivity of an IP network and reachability of a host.

Any view

ping clns

Use the

ping clns

command to test the reachability to a specified destination.

Any view

ping ipx

Use the

ping ipx

command to check host reachability and network connectivity in IPX network.

Any view

pki delete-certificate

Use the

pki delete-certificate

command to delete the locally stored certificates.

System view

Summary of Contents for 5000/6000



































































































































































Search results

Summary of Contents for 5000/6000

Reviews:

Related manuals for 5000/6000

Brands by name

Popular brands

3Com 5000/6000, Quick Reference Manual

Search results

Summary of Contents for 5000/6000

Reviews:

Related manuals for 5000/6000

Brands by name

Popular brands