3Com 5000/6000 Quick Reference Manual Download Page 36

Page: 36 / 162

3Com Router 5000/6000 Family

Command Reference

display bgp multicast routing as-path-acl

Use the

display bgp multicast routing as-path-acl

command to view in the BGP routing table the

MBGP routes that match the specified AS path list.

Any view

display bgp multicast routing cidr

Use the

display bgp multicast routing cidr

command to view the routing information with non-natural

network mask (that is, classless inter-domain routing, CIDR).

Any view

display bgp multicast routing community-list

Use the

display bgp multicast routing community-list

command to view the routing information that

is permitted by the MBGP community list.

Any view

display bgp multicast routing community

Use the

display bgp multicast routing community

command to view the routing information that

belongs to the specified MBGP community.

Any view

display bgp multicast routing different-origin-as

Use the

display bgp multicast routing different-origin-as

command to view AS routes with

different origins.

Any view

display bgp multicast routing peer

Use the

display multicast routing peer

command to view the route received from or sent to the

specified multicast neighbor.

Any view

display bgp multicast routing regular-expression

Use the

display bgp multicast routing regular-expression

command to view the routing information

matching the specified AS regular expression.

Any view

display bgp multicast routing statistic

Use the

display bgp multicast routing statistic

command to view statistics of MBGP route

information.

Any view

display bgp network

Use the

display bgp network

command to view the routing information that has been configured.

Any view

display bgp paths

Use the

display bgp paths

command to view the information about AS paths

Any view

display bgp peer

Use the

display bgp peer

command to view the information of peer.

Use the

display bgp multicast pee

r command to view the information of MBGP peer.

Use the

display bgp vpnv4 peer

command to view the information of VPN peer.

Any view

display bgp routing

Use the

display bgp routing

command to view the BGP routing information in the BGP routing table.

Use the

display bgp multicast routing

command to view the MBGP routing information in the BGP

routing table.

Use the

display bgp vpnv4 routing

command to view the VPN routing information in the BGP routing

table.

Any view

display bgp routing as-path-acl

Use the

display bgp routing as-path-acl

command to view routes that match an as-path ACL.

Any view

display bgp routing cidr

Use the

display bgp routing cidr

command to view the routing information about the non-natural mask

(namely the classless inter-domain routing, CIDR).

Any view

Summary of Contents for 5000/6000



































































































































































Search results

Summary of Contents for 5000/6000

Reviews:

Related manuals for 5000/6000

Brands by name

Popular brands

3Com 5000/6000, Quick Reference Manual

Search results

Summary of Contents for 5000/6000

Reviews:

Related manuals for 5000/6000

Brands by name

Popular brands