142
3Com Router 5000/6000 Family
Command Reference
spf-schedule-interval
Use the
spf-schedule-interval
command to configure the route calculation interval of OSPF.
OSPF view
spf-slice-size
Use the
spf-slice-size c
ommand to configure whether to set slice and the duration time each time when
IS-IS performs SPF route calculation.
IS-IS view
spt-switch-threshold
Use the
spt-switch-threshold
command to set the packet rate threshold when the PIM leaf router
switches from the RPT to the SPT.
PIM view
ssh authentication-type default
Use the
ssh authentication-type default
command to specify a default authentication mode for SSH
users.
System view
ssh client assign rsa-key
Use the
ssh client assign rsa-key
command to associate an SSH server with the name assigned to its
public key. When connecting to this server, the client verifies its trustworthiness based on this association.
System view
ssh client first-time enable
Use the
ssh client first-time enable
command to enable the SSH client to perform first-time
authentication on SSH servers.
System view
ssh server authentication-retries
Use the
ssh server authentication-retries
command to set the number of SSH connection
authentication retries, which is validated at next login.
System view
ssh server compatible_ssh1x enable
Use the
ssh server compatible_ssh1x enable
command to enable the SSH server to work with SSH1.X
clients.
System view
ssh server rekey-interval
Use the
ssh server rekey-interval
command to set the interval for updating the server key.
System view
ssh-server source-interface
Use the
ssh-server source-interface
command to specify a source interface, which must be an existing
local interface, for the SSH server. After that, the IP address of the specified interface is used as the source
IP address in each packet sent by the SSH server.
System view
ssh-server source-ip
Use the
ssh-server source-ip
command to specify a source IP address for the packets sent by the SSH
server. This IP address must be a local IP address.
System view
ssh server timeout
Use the
ssh server timeout
command to set a timeout for SSH connection authentication at login. It
becomes valid at next login.
System view
ssh user
Use the
ssh user
command to create an SSH user.
System view
ssh user assign
Use the
ssh user assign
command to assign one existing public key to a user. If a key exists, the new
assignment overrides.
System view
ssh user authentication-type
Use the
ssh user authentication-type
command to create an SSH user and specify an authentication
mode for it.
System view
