3Com Router 5000/6000 Family
99
Command Reference
mobile-ip tunnel path-mtu-discovery
Use the
mobile-ip tunnel path-mtu-discovery
command to set the PMTU update policy.
System view
mobile-ip virtual-network
Use the
mobile-ip virtual-network
command to define a virtual network.
System view
mobile-network
Use the
mobile-network
command to configure a mobile network for an MR.
HA-MR view
mobile-network
Use the
mobile-network
command to configure a mobile network for the MR.
MR view
mobile-node
Use the
mobile-node
command to set MN attributes, including the interface or virtual network and the
registration lifetime.
System view
mode
Use the
mode
command to configure the R2 signaling mode in a country or region.
R2 CAS view
mode (SIP Client view)
Use the
mode
command to set the registration mode of the gateway.
SIP Client view
modem
Use the
modem
or
modem both
command to allow modem calls to pass through, both incoming and outgoing.
Use the
modem
[ call-in | call-out ]
command to allow incoming or outgoing modem calls to pass
through.
User Interface view
modem adapt no-waiting-connect
Use the
modem adapt no-waiting-connect
command to set the asynchronous serial interface Modem to
switch from IDLE to ACTIVE without waiting for receiving the signal CONNECT (a signal used for a physical
modem to negotiation rate) after it receives CD_UP (a lower layer detects carrier signal).
User Interface view
modem auto-answer
Use the
modem auto-answer
command to have the external modem connected to the asynchronous
interface automatically answer or hook off.
User Interface view
modem auto-answer
Use the
modem auto-answer
command to set the answering mode to auto-answer.
User Interface view
modem compatible-param
Use the
modem compatible-param
command in the case that you fail to use standard Modem PCM to
interoperate with devices from other vendors.
Voice Entity view
modem protocol
Use the
modem protocol none
protocol to disable Modem function for single voice entity.
Use the
modem protocol pcm
command to configure PCM Modem protocol type for single voice entity,
including coding/decoding and Modem negotiation mode.
Voice Entity view
modem timer answer
Use the
modem timer answer
command to set the timeout time spent waiting for the carrier signal after the
off-hook action when setting up an incoming call connection.
User Interface view.
monitor-port
Use the
monitor-port
command to specify the current port as the monitoring port
Ethernet Interface view
more
Use the
more
command, you can view the contents of the specified file.
User view
