68
3Com Router 5000/6000 Family
Command Reference
fe1 detect-ais (E1-F interface)
Use the
fe1 detect-ais
command to enable alarm indication signal (AIS) detect on the E1-F interface.
E1-F Interface view
fe1 frame-format
Use the
fe1 frame-format
command to configure the framing format of the E1-F interface.
E1-F Interface view
fe1 loopback
Use the
fe1 loopback
command to place the E1-F interface in local or remote loopback.
E1-F Interface view
fe1 timeslot-list
Use the
fe1 timeslot-list
command to bundle timeslots on the E1-F interface.
E1-F Interface view
fe1 unframed
Use the
fe1 unframed
command to configure an E1-F interface to work in unframed mode.
E1-F Interface view
feac (CT3 Interface)
Use the
feac
command to enable FEAC channel signal detection and sending on the CT3 interface.
CT3 Interface view
fifo queue-length
Use the
fifo queue-length
command to set the FIFO queue length of frame relay virtual circuit.
Frame Relay Class view
file prompt
Use the
file prompt
command to enable or disable the router to warn when an operation may result in
data loss or corruption.
System view
filename
Use the
filename
command to configure the name of the file to be gotten from or put onto an FTP server.
HWPing Test Group view
filter-policy
Use the
filter-policy export
command to configure the filtering conditions of the routing information
advertised by a certain type of routing protocols.
Routing Protocol view
filter-policy export
Use the
filter-policy export
command to filter the advertised routes and only the routes passing the
filter can be advertised by BGP.
BGP Unicast view
BGP Multicast view
VPNv4 view
VPN Instance view
filter-policy export
Use the
filter-policy export
command to configure IS-IS to filter all redistributed routes or routes
redistributed from a specified routing protocol.
IS-IS view
filter-policy export
Use the
filter-policy export
command to configure OSPF to filter the LSAs of redistributed routes for
advertisement.
OSPF view
filter-policy export
Use the
filter-policy export
command to configure to filter the advertised routing information by RIP.
RIP view
filter-policy gateway
Use the
filter-policy gateway import
command to filter the routing information advertised by a
specified router.
Use the
filter-policy import
command to configure the condition for filtering the routing information.
Routing Protocol view
