130
3Com Router 5000/6000 Family
Command Reference
reset web url-filter parameter counter
Use the
reset web url-filter parameter counter
command to clear the statistics of SQL injection attack
protection.
User view
reset x25
Use the
reset x25
command to reset statistics about X.25 on the specified interface or to reset the specified
X.25 VC.
User view
reset xot
For SVC, use the
reset xot
command to initiatively clear an XOT link.
For PVC, use the
reset xot
command to initiatively reset an XOT link.
User view
restart
Use the
restart
command to reset the physical interface.
Interface view
retry
Use the
retry
command to set the maximum number of probing retries during an auto detect interval.
Detect Group view
retry
Use the
retry
command to configure the number of RADIUS request attempts.
RADIUS view
retry realtime-accounting
Use the
retry realtime-accounting
command to configure the maximum number of real-time accounting
request attempts allowed to have no responses.
RADIUS view
retry stop-accounting
Use the
retry stop-accounting
command to configure the maximal retransmission times after
stop-accounting request.
RADIUS view
retry stop-accounting
Use the
retry stop-accounting
command to enable stop-accounting packet retransmission and configure
the maximum number of stop-accounting request attempts.
view
return
Use the
return
command to return to user view from any other view.
All views except User view
reverse
Use the
reverse
command to configure the inversion mode of line signals.
R2 CAS view
reverse-rts
Use the
reverse-rts
command to reverse RTS signal.
Synchronous Serial Interface view
reverse-tunnel
Use the
reverse-tunnel
command to enable the reverse tunneling function for an MR.
MR view
ring-generate
Use the
ring-generate
command to configure the gateway at the called side to give a ringback tone when
in quick start mode.
Voice Subscriber-Line view
rip
Use the
rip
command to enable the RIP and enter the RIP view.
System view
rip authentication-mode
Use the
rip authentication-mode
command to configure RIP-2 authentication mode and corresponding
parameters.
Interface view
rip input
Use the
rip input
command to allow an interface to receive RIP packets.
Interface view
