3Com Router 5000/6000 Family
125
Command Reference
reset dlsw bridge-entry
Use the
reset dlsw bridge-entry
command to clear the entry cache information in the DLSw bridge
group.
User view
reset dlsw circuits
Use the
reset dlsw circuits
command to clear the DLSw virtual circuit information.
User view
reset dlsw ethernet-backup circuit
Use the
reset dlsw ethernet-backup circuit
command to clear information about all circuits that the
router and its neighbors have established with the remote peers since DLSw Ethernet redundancy is
enabled.
User view
reset dlsw ethernet-backup map
Use the
reset dlsw ethernet-backup map
command to clear the MAC address map of the Ethernet switch
support feature.
User view
reset dlsw reachable-cache
Use the
reset dlsw reachable-cache
command to clear information from the reachable-cache of the
DLSw.
User view
reset dlsw tcp
Use the
reset dlsw tcp
command to reestablish or delete all connection to all the remote peers.
Use the
reset dlsw tcp
ip-address
command to reestablish a TCP connection or delete the connection
to the specified remote peer.
User view
reset dns dynamic-host
Use the
reset dns dynamic-host
command to clear the current contents in the domain name cache of the
DNS client.
User view
reset dvpn all
Use the
reset dvpn all
command to clear all operating information about a specified DVPN domain and
to initiate the DVPN domain.
User view
reset dvpn map
Use the
reset dvpn map
command to clear a specified map.
User view
reset dvpn session
Use the
reset dvpn session
command to clear a specified session.
User view
reset dvpn statistics
Use the
reset dvpn statistics
command to clear all the statistics information of a DVPN module.
User view
reset encrypt-card sa
Use the
reset encrypt-card sa
command to clear the SAs on the encryption card.
User view
reset encrypt-card statistics
Use the
reset encrypt-card statistics
command to clear the statistics during processing of the
encryption card.
User view
reset encrypt-card syslog
Use the
reset encrypt-card syslog
command to clear all the logging information on the encryption card.
User view
reset esis statistics
Use the
reset esis statistics
command to reset statistics information about ES-IS flow.
User view
reset fcm
Use the
reset fcm
command to clear the dial-up negotiation failure counter and the timeout disconnection
counter for each FCM interface.
User view
