90
3Com Router 5000/6000 Family
Command Reference
isdn number-property
Use the
isdn number-property
command to set the type and code scheme of calling or called numbers in
incoming or outgoing ISDN calls.
ISDN Interface view
isdn overlap-sending
Use the
isdn overlap-sending
command to set the system to send the called number information in the
overlap mode on the ISDN interface.
ISDN Interface view
isdn q921-permanent
Use the
isdn q921-permanent
command to enable the Q.921 permanent link function.
ISDN Interface View
isdn pri-slipwnd-size
Use the
isdn pri-slipwnd-size
command to set the slide window size on a PRI interface.
Interface view
isdn protocol-mode
Use the
isdn protocol-mode
command to set the ISDN interface to operate on the user side or network
side of ISDN protocol.
ISDN Interface view
isdn protocol-type
Use the
isdn protocol-type
command to set the ISDN protocol to be run on an ISDN interface.
ISDN Interface view
isdn send-restart
Use the
isdn send-restart
command to enable PRI interfaces to actively send ISDN RESTART
messages to clear calls of the remote end before maintaining B channels.
System view
isdn spid auto_trigger
Use the
isdn spid auto_trigger
command to enable SPID auto-negotiation once on the BRI interface
running the NI protocol.
ISDN BRI Interface view
isdn spid nit
Use the
isdn spid nit
command to set the SPID processing mode to NIT (Not Initial Terminal) on an
NI-compliant BRI interface.
ISDN BRI Interface view
isdn spid resend
Use the
isdn spid resend
command to set the number of INFORMATION message retransmission
attempts for SPID negotiation or initialization on an NI-compliant BRI interface.
ISDN BRI Interface view
isdn spid service
Use the
isdn spid service
command to configure the service types that must be supported in SPI
negotiation on the BRI interface adopting NI protocol.
ISDN BRI Interface view
isdn spid timer
Use the
isdn spid timer
command to set the duration of the timer TSPID for an NI-compliant BRI interface
to timer_length.
ISDN BRI Interface view
isdn spid1
Use the
isdn spid1
command to configure SPID information for the B1 channel on the NI-compliant BRI
interface.
ISDN BRI Interface view
isdn spid2
Use the
isdn spid2
command to configure SPID information for the B1 channel on an NI-compliant BRI
interface.
ISDN BRI Interface view
