12
3Com Router 5000/6000 Family
Command Reference
ca identifier
Use the
ca identifier
command to specify the CA this device trusts and have the "
name
" CA bound with
this device.
PKI Domain view
cable
Use the
cable
command to set the cable length matching the CE1/PRI interface.
CE1/PRI Interface view
cable
Use the
cable
command to set the cable length of the ATM E1 interface.
ATM E1/T1 Interface view
cable
Use the
cable
command to configure the cable mode of ATM T3 cable, i.e., to set the distance between the
router and the cable distribution frame.
ATM T3 Interface view
cable (CT1/PRI Interface)
Use the
cable
command to set cable attenuation and length on a CT1/PRI interface to match the distance
of the transmission line.
CT1/PRI Interface view
cable (CT3 Interface)
Use the
cable
command to configure the length of the cable with which a CT3 interface is connected.
CT3 Interface view
cache-sa-enable
Use the
cache-sa-enable
command to enable the router to cache SA state.
MSDP view
call-mode
Use the
call-mode
command to configure a call-mode for calls between local router and peer router.
Voice Entity view
callednumber receive-method
Use the
callednumber receive-method
command to enable the device to place a call immediately after all
digits of the called number are collected or after a pound sign (#), the terminator, is received.
Voice Access-Number view
caller-permit
Use the
caller-permi
t command to configure the calling numbers that are permitted to call in.
Voice Entity view
car
Use the
car
command to configure traffic monitoring for a behavior.
Traffic Behavior view
card-digit
Use the
card-digit
command to configure the number of digits in a card number for an access service
number.
Voice Access-Number view
cas
Use the
cas
command to enter the R2 CAS view and digital E&M Signaling view.
CE1/PRI Interface view
cbs
Use the
cbs
command to set the committed burst size of frame relay virtual circuit.
Frame Relay Class view
ccc interface out-interface
Use the
ccc interface out-interface
command to create a local CCC connection.
System view
ccc interface transmit-lsp receive-lsp
Use the
ccc interface transmit-lsp receive-lsp
command to create a remote CCC connection.
System view
cd
Use the
cd
command to change the current path on the SFTP server. If you do not specify the remote-path
argument, the current path is displayed.
SFTP Client view
