3Com Router 5000/6000 Family
11
Command Reference
bridge-set stp enable
Use the
bridge-set stp enable
command to disable STP on the port.
Interface view
bridge-set stp port pathcost
Use the
bridge-set stp port pathcost
command to configure the path cost of the bridge port.
Interface view
bridge-set stp port priority
Use the
bridge-set stp port priority
command to configure the priority of the bridge port.
Interface view
bridge stp ieee
Use the
bridge stp ieee
command to specify a bridge set to support IEEE STP.
System view
bridge stp max-age
Use the
bridge stp max-age
command to set the Max Age timer on the bridge.
System view
bridge stp priority
Use the
bridge stp priority
command to assign a priority to the bridge.
System view
bridge stp timer forward-delay
Use the
bridge stp timer forward-delay
command to set the Forward Delay timer on the bridge.
System view
bridge stp timer hello
Use the
bridge stp timer hello
command to set the Hello Time timer on the bridge.
System view
bridge vlanid-transparent-transmit enable
Use the
bridge vlanid-transparent-transmit enable
command to enable VLAN ID transparent
transmission.
Interface view
broadcast-limit link
Use the
broadcast-limit link
command to configure the maximum number of links that the virtual
template supports for sending multicast or broadcast packets.
Virtual Template view
broadcast suppression
Use the
broadcast-suppression
command to restrict the broadcast traffic size on the port.
Ethernet Port view
bsr-policy
Use the
bsr-policy
command to restrict the range for valid BSR, preventing BSR spoofing.
PIM view
bump
Use the
bump
command to configure the standby PVC that will take over when a specified PVC goes down.
ATM Pvc-Group view
busytone-t-th
Use the
busytone-t-th
command to configure the threshold of busy tone detection.
FXO Voice Subscriber-Line view
bye
Use the
bye
command to disconnect from the remote FTP server and exit to user view.
FTP Client view
bye
Use the
bye
command to terminate the connection to the remote SFTP server and exit to system view as
you would with the
exit
and
quit
commands.
SFTP Client view
c-bsr
Use the
c-bsr
command to configure a candidate BSR.
PIM view
c-rp
Use the
c-rp
command to configure the router to advertise itself as a candidate RP to BSR.
PIM view
