3Com Router 5000/6000 Family
9
Command Reference
balance
Use the
balance
command to configure the number of routes participating in BGP load balancing.
BGP view
band-based-sharing
Use the
band-based-sharing
command to enable bandwidth-based unbalanced load sharing.
System view
baudrate
Use the
baudrate
command to set the baud rate of a serial interface.
Serial Interface view
bert
Use the
bert
command to set test error bit for line Bit.
CE3 interface view
bert (CT1/PRI Interface)
Use the
bert
command to start a BERT test on the CT1/PRI interface.
CT1/PRI Interface view
bert (CT3 Interface)
Use the
bert
command to start a BERT test on the CT3 interface.
CT3 Interface view
bgp
Use the
bgp
command to enable BGP and enter the BGP view.
System view
This command is used to enable and disable BGP as well as to specify the local AS number of BGP.
bims boot request
Use the
bims boot request
command to enable the BIMS device to access the branch intelligent
management system (BIMS) center at startup.
System view
bims device-id string
Use the
bims device-id
command to configure the unique identifier of the BIMS device at the BIMS center.
System view
bims enable
Use the
bims enable
command to enable BIMS.
System view
bims interval
Use the
bims interval
command to configure the interval for accessing the BIMS center. When the interval
is set to 0, the BIMS device does not access the BIMS center regularly.
System view
bims ip address
Use the
bims ip address
command to configure the IP address and port number of the BIMS center.
System view
bims request
Use the
bims request
command to have the BIMS device access the BIMS center.
System view
bims-server
Use the
bims-server
command to enable and configure BIMS option for a global address pool on the
DHCP server.
Global DHCP Address Pool view
bims sharekey
Use the
bims sharekey
command to configure the shared key between the BIMS device and the BIMS
center.
System view
bims source ip-address
Use the
bims source ip-address
command to specify a source IP address for the packets sent by the
BIMS device. It can be the IP address of a port on the router.
System view
bims specify-time
Use the
bims specify-time
command to configure the BIMS device to access the BIMS center at the
specified time and if desired, configure the device to access the BIMS center at regular intervals from then
on during a specified period.
System view
