3Com 5000/6000 Quick Reference Manual Download Page 46

Page: 46 / 162

3Com Router 5000/6000 Family

Command Reference

display interface null

Use the

display interface null

command to view the state about the null interface.

Any view

display interface pos

Use the

display interface pos

command to view the configuration and state information of one or all POS

interfaces.

Any view

display interface tunnel

Use the

display interface tunnel

command to view the working status of tunnel interface.

Any view

display interface virtual-ethernet

Use the

display interface virtual-ethernet

command to view the state about of the specified or all

virtual Ethernet interfaces.

Any view

display interface virtual-template

Use the

display interface virtual-template

command to view the state about the specified or all virtual

templates.

Any view

display ip count

Use the

display ip count

command to display IP packet statistics gathered by the IP Accounting.

Any view

display ip count rule

Use the

display ip count rule

command to display IP accounting rules.

Any view

display ip fast-forwarding cache

Use the

display ip fast-forwarding cache

command to view information on the unicast fast forwarding

table.

Any view

display ip host

Use the

display ip host

command to display all the host names and their corresponding IP addresses.

Any view

display ip interface

Use the

display ip interface

command to view IP-related information about the specified or all

interfaces.

Any view

display ip interface brief

Use the

display ip interface brief

command to view IP-related summary about the specified or all

interfaces.

Any view

display ip ip-prefix

Use the

display ip ip-prefix

command to view the address prefix list.

Any view

display ip multicast-fast-forwarding cache

Use the

display ip multicast-fast-forwarding cache

command to display summary information about

the fast forwarding table entries in the multicast fast forwarding cache.

Any view

display ip multicast-policy

Use the

display ip multicast-policy

command to view the multicast policy routing information.

Any view

display ip netstream cache

Use the

display ip netstream cache

command to view configuration and status information about the

NetStream cache.

Any view

display ip netstream export

Use the

display ip netstream export

command to view statistics about exported NetStream UDP

packets.

Any view

Summary of Contents for 5000/6000



































































































































































Search results

Summary of Contents for 5000/6000

Reviews:

Related manuals for 5000/6000

Brands by name

Popular brands

3Com 5000/6000, Quick Reference Manual

Search results

Summary of Contents for 5000/6000

Reviews:

Related manuals for 5000/6000

Brands by name

Popular brands