90
C
HAPTER
4: S
ERVER
F
AILOVER
C
ONFIGURATION
local_server.
properties file
The
local_server.properties
file contains the settings for the EMS
Server Failover, as shown below.
############## Remote Server For Server Failover #############
# This server identifies the remote server which forms part of
the Server Failover system.
# Remote_server=
############### Preferred Server For Server Failover
####################
# When Preferred_Server is set to 'yes', the EMS server starts
# its 'listener' system before trying to contact the remote EMS
# server specified by Remote_Server.
# Preferred_server=
############# Retry Count for Server Failover ################
# This specifies the number of attempts made to connect to the
remote server
# once the count reaches the Remote_Server_Retries value it
will make no further
# attempts
# Remote_Server_Retries=4
############# Timeout Count for Server Failover###############
# This specifies the number of seconds between any two retry
attempts
# when contacting the Remote_Server
# Remote_Server_Timeout=5
All Server Failover variables are commented out by default.
The
local_server.properties
file overrides the settings in
server.properties
and is only ever read from the directory in
which the EMS server is running. To locate the files in
EMS_FILEHOME
and override the
server.properties
settings, EMS reads the files in
the following sequence:
1
EMS reads the
local_server.properties
file to obtain the
EMS_FILEHOME
setting which it then uses to locate
server.propertie
s.
2
Using
EMS_FILEHOME
, EMS reads the
server.properties
file.
3
EMS then re-reads
local_server.properties
to override any settings in
server.properties
.
While most of the contents of
server.properties
must be shared
between both servers, some settings, such as those for Server Failover,
Summary of Contents for 3CR15600 - Enterprise Management Suite
