manualshive.com logo in svg

3Com 3CR15600 - Enterprise Management Suite, Getting Started Manual

Share
Download
3Com 3CR15600 - Enterprise Management Suite Getting Started Manual Download Page 198

198

C

HAPTER

 10: O

PERATIONS

is no guarantee that it will be allowed to. In the daily console log, you will 
see entries similar to the following:

11/27/2004 14:53:38 (E) ** SERVER PANIC - Attempting to close logs and 
database connections **
11/27/2004 14:53:38 (I) FDServerLog:log\AuditLog-20021127.log 
shutting down...
11/27/2004 14:53:38 (I) ObjectDB: Database connection shutting down...
Database fdserver is shutting down...
Database fdserver shutdown complete.
11/27/2004 14:53:38 (I) FDNotificationSender: Stop broadcasting server 
updates

This is an indication that Windows forced the EMS server to stop. 
Currently, there is no mechanism to prevent this from happening.

To access the server console commands available from a daemon, see 

Displaying Server Console Commands

 on 

page 203

.

Stopping the EMS

Server

To shut down the EMS server, enter one of the following commands from 
the EMS Server command prompt:

■

exit

■

quit

■

stop

Starting the EMS GUI

Client

To start the EMS GUI client, see 

Installation and Initial Setup

 

on

 

page 55

.

If you are already logged into the EMS GUI client and you want to log in 
as another user, select the “Log in as another user command” from the 
“File” menu. The current EMS GUI client session stops and the “Login” 
screen appears.

Stopping the EMS

GUI Client

You can log out of the EMS GUI client in one of two ways:

■

From the “File” menu, click “Log out”.

■

Click the logout and exit button on the EMS GUI Toolbar, as shown in 

Figure 76

.

Summary of Contents for 3CR15600 - Enterprise Management Suite



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands