3Com 3CR15600 - Enterprise Management Suite Getting Started Manual Download | Manualshive

Page: 59 / 218

background image

Navigating the Enterprise Management Suite Directories

59

Installing the EMS

Server using the

Silent Option

To install the core on a dumb terminal or from a Telnet console, use the
silent installation command option:

java -jar EMSSetup.jar -silent

CAUTION:

With this option, you cannot override any installation

defaults.You will not be able to choose the name of the installation
directory or which EMS components to install.

Installing the EMS

Server using the

Console Option

The installer can be run with the

–console

option, shown below. This

provides a text version of the installation wizard. Enter the command as
follows:

java -jar EMSSetup.jar -console

The following screen displays:

------------------------------------------------------------------

3Com Enterprise Management Suite v2.40

This will install 3Com Enterprise Management Suite v2.40 on your

computer. To continue, choose Next.

3Com Enterprise Management Suite v2.40

Copyright (c) 2002-2006

www.3com.com

Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]

Navigate the text based wizard via the numeric keys. This installation
option means that it is possible to modify the default options, such as
the installation directory.

Navigating the
Enterprise
Management Suite
Directories

During installation, EMS creates the necessary directories and files to run
and configure the EMS server and clients according to your customized
needs.

«
...
57
58
59
60
61
...
»

Summary of Contents for 3CR15600 - Enterprise Management Suite



























































































































































































































Reviews:

No comments

Related manuals for 3CR15600 - Enterprise Management Suite

Jetstream CPX-1000

Brand: Paradyne Pages: 93

HXDU010EB - Story Station 1 TB External Hard...

Brand: Samsung Pages: 7

Brand: Oberheim Pages: 64

COLDFUSION STUDIO 4.5-USING COLDFUSION...

Brand: MACROMEDIA Pages: 236

Brand: HP Pages: 4

Brand: Extreme Networks Pages: 376

Web-based Management Utility

Brand: Supermicro Pages: 64

25366 - Camera Control Pro

Brand: Nikon Pages: 94

VIRTUALBOX 3.0.0

Brand: Sun Microsystems Pages: 259

DREAMWEAVER MX 2004-DREAMWEAVER API

Brand: MACROMEDIA Pages: 486

FLASH 8-DEVELOPING FLASH LITE 2.X

Brand: MACROMEDIA Pages: 94

Brand: ZENEC Pages: 80

IDENTITY MANAGER 3.6.1 - STAGING BEST PRACTICES GUIDE 2010

Brand: Novell Pages: 54

Projector Toolset

Brand: Barco Pages: 245

Brand: LG Pages: 2

Brand: Zhone Pages: 1

9.0 EMAIL SERVER EDITION

Brand: AVG Pages: 58

9.0 FILE SERVER

Brand: AVG Pages: 133

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands