manualshive.com logo in svg

3Com 3CR15600 - Enterprise Management Suite, Getting Started Manual

Share
Download
3Com 3CR15600 - Enterprise Management Suite Getting Started Manual Download Page 35

Help Options

35

Help Options

EMS has four help options available for you to use: the Help menu, Tool 
Tips, the Advisor window, and Online help.

Help Menu

The Help menu on the EMS Toolbar allows access to the following 
information:

■

About

 — EMS software information. For more information, see 

“Viewing Software Version and Copyright Information”

on 

page 168

.

■

Contents

 — The EMS Online help system. For more information, see 

“Online Help”

on 

page 36.

■

Show Advisor

 — For more information, see 

“Advisor Window”

on

 

page 36

.

■

Copyright

 — Copyright information. For more information, see 

“Viewing Software Version and Copyright Information”

 on 

page 168

.

Tool Tips

Tool tips are available for most commands and functions.

To display a tool tip, place the cursor over a node, command, or 
parameter in EMS and a tool tip appears. See 

Figure 5

.

Figure 5   

Sample Tool Tip

Tool Tip

Summary of Contents for 3CR15600 - Enterprise Management Suite



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands