manualshive.com logo in svg

3Com 3CR15600 - Enterprise Management Suite, Getting Started Manual

Share
Download
3Com 3CR15600 - Enterprise Management Suite Getting Started Manual Download Page 205

Configuring Table Data Loading

205

To change the table data loading from one mode to the other, do 

one

 of 

the following steps:

1

If the 

Table loading 

indicator is 

green:

 EMS is set to load table data 

continuously. Click 

Table loading

.

The 

Table loading

 indicator changes to 

red

, and EMS changes to loading 

the table data line by line as you scroll down in a full on-screen table 
display.

2

If the 

Table loading 

indicator is 

red:

 EMS is set to load table data line by 

line as you scroll down in a full on-screen table display. Click 

Table 

loading

.

The 

Table loading

 indicator changes to 

green

, and EMS changes to 

loading the table data continuously.

Summary of Contents for 3CR15600 - Enterprise Management Suite



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands