Zodiac AquaLink M8, Руководство по установке

Страница: 29 / 44

Page 29
AquaLink
®
M8 | Installation Manual
Page 28
AquaLink
®
M8 | Installation Manual
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX 1
AUX 2
AUX 3
MORE
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SPA WILL
TURN ON
AFTER DELAY
* * *
ON
OFF
OFF
OFF
OFF
OFF
OFF
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX 1
AUX 2
AUX 3
MORE
SPA HEAT
ENABLED
SET TO 102°F
Use ARROW KEYS
to set valus.
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX 1
AUX 2
AUX 3
MORE
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX 1
AUX 2
AUX 3
MORE
ON
ON
OFF
ON
OFF
OFF
OFF
OFF
4.10 Solar Heat
The SOLAR HEAT selection controls solar heating.
A solar heating system and optional solar sensor are
required for SOLAR HEAT selection to operate and
must be part of the normal circulation system.
4.10.1 To use Solar Heat
Highlight SOLAR HEAT and press SELECT. Use the
SELECT button to turn SOLAR HEAT on or off.
For solar heating to take place, the SOLAR HEAT (in
EQUIPMENT ON/OFF) must be enabled, also the filter
pump must be on. Solar temperature must be at least 5°F
(-15°C) above the water temperature and the water must
be cooler than the thermostat setting.
NOTE If no Solar Sensor is installed, EXTRA AUX will
appear as a menu item.
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX 1
AUX 2
AUX 3
MORE
POOL
OFF
OFF
OFF
OFF
AIR
POOL MODE
POOL HEATER
SPA MODE
SPA HEATER
MENU
EQUIPMENT ON/OFF
FRI 10:30 PM
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
ENA
OFF
OFF
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX 1
AUX 2
AUX 3
MORE
NOTE If no Solar Sensor is installed, EXTRA AUX will
appear as a menu item.
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
AUX 1
AUX 2
AUX 3
EXTRA AUX
MORE
4.11 Auxiliary Equipment
The AUX modes control each of the auxiliary devices
plus an extra AUX. To assign a different name to an
auxiliary device, use the SYSTEM SETUP and LABEL
AUX menus.
NOTE Auxiliary devices are items or equipment such
as pool and spa lights, waterfalls, or air blowers.
4.11.1 To turn an Auxiliary on or off
Highlight EQUIPMENT ON/OFF and press SELECT.
Highlight an AUX and press SELECT. Use the SELECT
button to turn the equipment on or off.
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX 1
AUX 2
AUX 3
MORE
ON
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX 1
AUX 2
AUX 3
MORE
4.12 Heat Pump
NOTE This equipment may not be part of your system.
Please check with your installer. The label HEAT
PUMP may take up to 24 hours to appear on the
screen after initial heat pump installation.
The HEAT PUMP selection controls the heat pump
operation. In order to use the heat pump, the filter pump
must be turned on and the heat pump must be in HEAT
MODE (See Section 5.10), and the switch on the heat
pump on the equipment pad must also be set to HEAT
MODE.
NOTE HEAT PUMP takes the place of EXTRA AUX or
SOLAR HEAT. It is not possible to have any two
of these on the EQUIPMENT ON/OFF menu at
the same time.