Page 31
AquaLink
®
M8 | Installation Manual
Page 30
AquaLink
®
M8 | Installation Manual
4.12.1 To use Heat Pump
Highlight EQUIPMENT ON/OFF and press SELECT.
Highlight HEAT PUMP and press SELECT. Press the
SELECT button to enable/disable the HEAT PUMP. The
HEAT PUMP uses the SET TEMP set point.
4.13 Set Light Colors
NOTE
This equipment may not be part of your system.
Please check with your installer.
The SET COLOR menu is used to set the color of a
color light and then turn the light on.
NOTE
Prior to setting the color of the light, the light
must be assigned and controlled by an auxiliary
(for example, AUX 1). See “Using System
Setup” to assign the light to an auxiliary control.
Please note that the auxiliary control can be
custom labeled.
4.13.1 To use Set Colors
Highlight EQUIPMENT ON/OFF and press SELECT.
Highlight the auxiliary assigned to the color light
and press SELECT. A list of available colors will be
displayed. The most recently selected color will be
highlighted. Use the UP/DOWN arrow keys to highlight
the desired color and press SELECT.
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
POOL LIGHT
AUX 2
AUX 3
MORE
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
PLEASE
WAIT . . .
CYCLING TO
CHOSEN COLOR
SET COLOR
ALPINE WHITE
SKY BLUE
COBALT BLUE
CARIBBEAN BLU
SPRING GREEN
EMERALD GREEN
EMERALD ROSE
MAGENTA
MORE
EQUIPMENT
FILTER PUMP
SPA
POOL HEAT
SPA HEAT
SOLAR HEAT
POOL LIGHT
AUX 2
AUX 3
MORE
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
NOTE
If you select POOL LIGHT or SPA LIGHT from
the EQUIPMENT ON/OFF menu and the light
is already ON, pressing SELECT will display
the message “LIGHT WILL TURN OFF IN 5
SECONDS. IF YOU WANT TO CHANGE THE
COLOR PRESS SELECT NOW”. If you press
SELECT, the SET COLOR menu will open and
allow you to select a different color. If a different
color is chosen, the light will reset to Alpine
White, rotate to the selected color, and then
automatically lock on to that color. During the
color rotation, the message “PLEASE WAIT…
CYCLING TO CHOSEN COLOR” will be
displayed.
When a pool or spa light is turned ON manually,
by the PDA Handheld Remote panel, or by a
program, the last used color will automatically
be chosen unless you press SELECT to change
the color.
If you press the BACK key when in the
EQUIPMENT ON/OFF menu, the light will turn
on the
last
selected color. If the SELECT key or
the BACK key is not pressed, and if it has been
Содержание AquaLink M8
Страница 7: ...Page 7 AquaLink M8 Installation Manual Dimensions 122...
Страница 41: ...Page 41 AquaLink M8 Installation Manual NOTES...
Страница 42: ...Page 42 AquaLink M8 Installation Manual NOTES...
Страница 43: ...Page 43 AquaLink M8 Installation Manual NOTES...